如何给kloxo增加硬盘空间

[root@XenSystem ~]# df -hal Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 5.7G 1.1G 4.4G 20% / proc 0 0 0 - /proc sysfs 0 0 0 - /sys devpts 0 0 0 - /dev/pts /dev/xvda1 99M 27M 67M 29% /boot tmpfs 257M 0 257M 0% /dev/shm none 0 0 0 - /proc/sys/fs/binfmt_misc sunrpc 0 0 0 - /var/lib/nfs/rpc_pipefs [root@XenSystem~]# free -m total       used       free     shared    buffers     cached Mem:           512        506          5          0        447          9 -/+ buffers/cache:         49        463 Swap:         2079          0       2079

Disk /dev/xvdb: 23.6 GB, 23622320128 bytes 255 heads, 63 sectors/track, 2871 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk /dev/xvdb doesn't contain a valid partition table Disk /dev/xvda: 8589 MB, 8589934592 bytes 255 heads, 63 sectors/track, 1044 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot      Start         End      Blocks   Id  System /dev/xvda1   *           1          13      104391   83  Linux /dev/xvda2              14        1044     8281507+  8e  Linux LVM

[root@XenSystem ~]# fdisk /dev/xvdb Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel Building a new DOS disklabel. Changes will remain in memory only, until you decide to write them. After that, of course, the previous content won't be recoverable. The number of cylinders for this disk is set to 2871. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite) #输入n，新建分区 Command (m for help): n #输入P，主分区 Command action e   extended p   primary partition (1-4) p #目前是xvdb第一个分区输入1 Partition number (1-4): 1 #敲回车，默认就行了 First cylinder (1-2871, default 1): Using default value 1 Last cylinder or +size or +sizeM or +sizeK (1-2871, default 2871): Using default value 2871 #这里输入t，指定分区的格式为8e (LVM) Command (m for help): t Selected partition 1 Hex code (type L to list codes): 8e Changed system type of partition 1 to 8e (Linux LVM) #这里输入w，保存退出 Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks.

[root@XenSystem]# fdisk -l Disk /dev/xvdb: 23.6 GB, 23622320128 bytes 255 heads, 63 sectors/track, 2871 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/xvdb1 1 2871 23061276 8e Linux LVM Disk /dev/xvda: 8589 MB, 8589934592 bytes 255 heads, 63 sectors/track, 1044 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/xvda1 * 1 13 104391 83 Linux /dev/xvda2 14 1044 8281507+ 8e Linux LVM

[root@XenSystem ~]# vgs VG #PV #LV #SN Attr VSize VFree VolGroup2011 2 2 0 wz--n- 49.84G 0

[root@XenSystem~]# pvcreate /dev/xvdb1 Physical volume "/dev/xvdb1" successfully created [root@XenSystem~]# vgextend VolGroup2011 /dev/xvdb1 Volume group "VolGroup2011" successfully extended

[root@XenSystem~]# vgdisplay --- Volume group --- VG Name               VolGroup2011 System ID Format                lvm2 Metadata Areas        2 Metadata Sequence No  4 VG Access             read/write VG Status             resizable MAX LV                0 Cur LV                2 Open LV               2 Max PV                0 Cur PV                2 Act PV                2 VG Size               29.84 GB PE Size               32.00 MB Total PE              955 Alloc PE / Size       252 / 7.88 GB Free  PE / Size       703 / 21.97 GB VG UUID               jWlke0-R01B-RqBP-Qp1X-xxi0-ltOI-FompAt

[root@XenSystem~]# lvresize -L +21.96G /dev/mapper/VolGroup2011-LogVol00 Rounding up size to full physical extent 21.97 GB Extending logical volume LogVol00 to 27.81 GB Logical volume LogVol00 successfully resized [root@XenSystem~]# resize2fs /dev/mapper/VolGroup2011-LogVol00 resize2fs 1.39 (29-May-2006) Filesystem at  /dev/mapper/VolGroup2011-LogVol00  is mounted on /; on-line resizing require d Performing an on-line resize of  /dev/mapper/VolGroup2011-LogVol00  to 7290880 (4k) blocks. The filesystem on  /dev/mapper/VolGroup2011-LogVol00 is now 7290880 blocks long.

[root@XenSystem~]# df -hal Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup2011-LogVol00 27G 1.1G 25G 5% / proc 0 0 0 - /proc sysfs 0 0 0 - /sys devpts 0 0 0 - /dev/pts /dev/xvda1 99M 27M 67M 29% /boot tmpfs 257M 0 257M 0% /dev/shm none 0 0 0 - /proc/sys/fs/binfmt_misc sunrpc 0 0 0 - /var/lib/nfs/rpc_pipefs